DIY Plywood Spiral Stairs: OMG

 

A really simple template, a really repetitive process, and a lot of glue go into this not-so-weekend project.

 

Each tread required a little more than a sheet of 3/4 furniture grade plywood, which is cut on a CNC machine. a single tread takes about two hours to assemble, so the completed stairway took about 

Download the drawings here.

a three-inch schedule 40 steel pipe was welded to a steel plate and bolted to LVLs in the floor frame.

Ben glued the plywood to the steel pipe with construction adhesive and the plywood to the plywood with wood glue. He screwed it all together with three-inch finish screws

He also drove five-inch screws up through the layers, where two treads meet, so strengthen this potential weak spot.

To finish, he sanded the heck out of it and applied Minwax Polycrylic.

 

—Ben Uyeda is a designer, lecturer, and entrepreneur focusing on the field of affordable and sustainable design. This video treat is from HomeMadeModern, his YouTube channel.

 

Daniel Morrison
Previous
A Ladder Fall From Six Feet Can Be Fatal
Next
Draw Perfect Arcs for Big Gates

expand_less